Search
Current Category
Adam Hall Hardware
2U 19" Racks 4U 19" Racks 6U 19" Racks 19" Table Top Racks Acc. for Loudspeakers Accessories Aluminium case profile Birch Plywood Blanking Panels Catches And Locks DJ Equipment Cases Flat Displays Mobile Stands Flightcase Corners Flight Case fittings Flightcase Handles Flying Accessories Foam Label Tabs Misc. Computer Accessories Misc. Rack Parts and Accessories Musicstand Lights Other Accessories Other components Paint, Varnish, Glue Power Distribution Modules Rack/Case Hinges Rack/Case Wheels Rack Drawers Rack Feet Misc Rack Fittings Racklights Rack Mount Kits 19" Rack Recess Plates Rack systems Rack Trays Specialty stands Stands for Guitars and Basses Studio Racks Studio Stands Table Mic Stands Wind UP Stands
2U 19" Racks 4U 19" Racks 6U 19" Racks 19" Table Top Racks Acc. for Loudspeakers Accessories Aluminium case profile Birch Plywood Blanking Panels Catches And Locks DJ Equipment Cases Flat Displays Mobile Stands Flightcase Corners Flight Case fittings Flightcase Handles Flying Accessories Foam Label Tabs Misc. Computer Accessories Misc. Rack Parts and Accessories Musicstand Lights Other Accessories Other components Paint, Varnish, Glue Power Distribution Modules Rack/Case Hinges Rack/Case Wheels Rack Drawers Rack Feet Misc Rack Fittings Racklights Rack Mount Kits 19" Rack Recess Plates Rack systems Rack Trays Specialty stands Stands for Guitars and Basses Studio Racks Studio Stands Table Mic Stands Wind UP Stands
Category
Manifacturer
Home
» Adam Hall Hardware
» 5635
Adam Hall Hardware 5635
Features:
HUM FREE Mounting Kit M6
Usual mounting of 19" equipment in a rack system results in contact between the devices through the rack rails.This creates ground loops - the most common cause of hum and noise. The unique Humfrees mounting system interrupts these groundloops by isolating the 19" units from the rails and from each other. Scarring and scratching of the front panel by the mounting screws is also eliminated.
- Pull the unit out of the rack 5 cm. There is normally no need to disconnect the cables.
- Bend the Humfrees Insulating Parts (4 x) around the corners of the front panel from the sides.
- Reinstall the unit with the Humfrees Screws (4 x M6).
For M5 or Inch based rack systems: Use your normal screws in combination with the Humfrees Adapters (4 x).
Note: Adjacent rackmount units must not touch each other anywhere along the surface of their chassis.
Usual mounting of 19" equipment in a rack system results in contact between the devices through the rack rails.This creates ground loops - the most common cause of hum and noise. The unique Humfrees mounting system interrupts these groundloops by isolating the 19" units from the rails and from each other. Scarring and scratching of the front panel by the mounting screws is also eliminated.
- Pull the unit out of the rack 5 cm. There is normally no need to disconnect the cables.
- Bend the Humfrees Insulating Parts (4 x) around the corners of the front panel from the sides.
- Reinstall the unit with the Humfrees Screws (4 x M6).
For M5 or Inch based rack systems: Use your normal screws in combination with the Humfrees Adapters (4 x).
Note: Adjacent rackmount units must not touch each other anywhere along the surface of their chassis.
Our Price
BUY NOW!
Availability of this item:
In Stock
In Stock
Warranty: 12 months
Продуктът е наличен в
• София, Магазин MusicWorld.bg бул. "Проф. Цветан Лазаров" 74А
• София, Централен склад бул. "Проф. Цветан Лазаров" 74А
Useful links:
Into Category:
Flight Case fittings
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 1.23 seconds