Search
Current Category
DYNACORD
+ Power Amps. 850-2000 Watt (4 ohm)
Acc. for Loudspeakers Accessories for Mixers Active Subwoofers Clubmixer Complete Sound Systems Covers for Loudspeakers Distance Poles Full-Range Active Loudspeakers Full-Range Passive Loudspeakers Installation Power Amplifiers Line Arrays Mid-Hi Point Source Loudspeakers Mixer Cases Multi-Channel Power Amps. PA Equipment Bags Passive Subwoofers Power Amps. 2000 W or More (4 ohm) Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Powered Mixiers Rack Mount Kits 19" Speaker Stands Standard Mixing Desks USB/Firewire Mixers
Acc. for Loudspeakers Accessories for Mixers Active Subwoofers Clubmixer Complete Sound Systems Covers for Loudspeakers Distance Poles Full-Range Active Loudspeakers Full-Range Passive Loudspeakers Installation Power Amplifiers Line Arrays Mid-Hi Point Source Loudspeakers Mixer Cases Multi-Channel Power Amps. PA Equipment Bags Passive Subwoofers Power Amps. 2000 W or More (4 ohm) Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Powered Mixiers Rack Mount Kits 19" Speaker Stands Standard Mixing Desks USB/Firewire Mixers
Category
Manifacturer
Home
» DYNACORD
» Power Amps. 850-2000 Watt (4 ohm)
» C1800FDI
DYNACORD C1800FDI
Features:
C1800FDI • DSP Power Amplifier • 2 x 950 W @ 4 Ohms • FIR Drive • 70V / 100V Output • GPI Remote Power
Features:
• Installation DSP Amplifier, Euroblock Connectors
• Fully Integrated Professional Speaker Processing with FIR Drive Technology
• Low Z and 70/100V Operation and Power Saving Standby Mode
• Intuitive System Control Software, Makes Setup and Control Easy
Technical Specifications:
• Maximum Output Power, Single Channel into 2 / 2.6 / 4 / 8 Ohms: 1600 W / 1300 W / 950 W / 480 W
• Maximum Output Power, Dual Channel into 2 / 2.6 / 4 / 8 Ohms: 1400 W / 1200 W / 850 W / 450 W
• Maximum Output Power, Bridged into 4 / 8 Ohms: 2800 W / 1700 W
• Load Capability into 2 Ohms: 2 x 1250 W (-1.5 dB)
• Direct Drive into 2 / 4 Ohms: 70V / 100V
• Dual Channel Bridged into 4 Ohms: 1 x 1250 W
• Maximum RMS Voltage Swing THD = 1%, 1 kHz: 65.1 V
• Voltage Gain Ref.1 kHz: 32.0 dB
• THD at 450 W/4 Ohms MBW = 80 kHz, 1kHz: < 0.05%
• IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
• DIM30, 3.15 kHz, 15 kHz: < 0.05%
• Maximum Input Level: +21 dBu
• Crosstalk ref. 1 kHz, at 100W/4 Ohms: < -80 dB
• Frequency Response, ref. 1 kHz: 10 Hz to 21 kHz (±1 dB)
• Input Impedance, Active Balanced: 20 kOhms
• Signal to Noise Ratio Amplifier, A-Weighted, ref to Max. Output Power @ 8 Ohms: >105 dB
• Output Noise, A-Weighted: < -68 dBu
• Output Stage Topology: Class AB
• Power Consumption 1/8 Maximum Output Power @ 4 Ohms: 700 W
• Protection: Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak Current Limiters, In Rush Current Limiters, Turn on Delay
• Cooling: Front-to-Rear, 3-Stage-Fans
• Safety Class: I
• Dimensions (W x H x D), mm: 483 x 88 x 462.4
• Weight: 15.2 kg
• Remote Power ON/GPIO: Power Remote via Switch, Delay Time Selectable Floating Relay Contacts (Show Protect Mode) Inputs for Preset Selection
• Signal Processing: FIR Filters, Audio Limiters Output Delay per Channel, 31 Band GEQ per Channel, PEQ per Channel, Load Impedance
Features:
• Installation DSP Amplifier, Euroblock Connectors
• Fully Integrated Professional Speaker Processing with FIR Drive Technology
• Low Z and 70/100V Operation and Power Saving Standby Mode
• Intuitive System Control Software, Makes Setup and Control Easy
Technical Specifications:
• Maximum Output Power, Single Channel into 2 / 2.6 / 4 / 8 Ohms: 1600 W / 1300 W / 950 W / 480 W
• Maximum Output Power, Dual Channel into 2 / 2.6 / 4 / 8 Ohms: 1400 W / 1200 W / 850 W / 450 W
• Maximum Output Power, Bridged into 4 / 8 Ohms: 2800 W / 1700 W
• Load Capability into 2 Ohms: 2 x 1250 W (-1.5 dB)
• Direct Drive into 2 / 4 Ohms: 70V / 100V
• Dual Channel Bridged into 4 Ohms: 1 x 1250 W
• Maximum RMS Voltage Swing THD = 1%, 1 kHz: 65.1 V
• Voltage Gain Ref.1 kHz: 32.0 dB
• THD at 450 W/4 Ohms MBW = 80 kHz, 1kHz: < 0.05%
• IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
• DIM30, 3.15 kHz, 15 kHz: < 0.05%
• Maximum Input Level: +21 dBu
• Crosstalk ref. 1 kHz, at 100W/4 Ohms: < -80 dB
• Frequency Response, ref. 1 kHz: 10 Hz to 21 kHz (±1 dB)
• Input Impedance, Active Balanced: 20 kOhms
• Signal to Noise Ratio Amplifier, A-Weighted, ref to Max. Output Power @ 8 Ohms: >105 dB
• Output Noise, A-Weighted: < -68 dBu
• Output Stage Topology: Class AB
• Power Consumption 1/8 Maximum Output Power @ 4 Ohms: 700 W
• Protection: Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak Current Limiters, In Rush Current Limiters, Turn on Delay
• Cooling: Front-to-Rear, 3-Stage-Fans
• Safety Class: I
• Dimensions (W x H x D), mm: 483 x 88 x 462.4
• Weight: 15.2 kg
• Remote Power ON/GPIO: Power Remote via Switch, Delay Time Selectable Floating Relay Contacts (Show Protect Mode) Inputs for Preset Selection
• Signal Processing: FIR Filters, Audio Limiters Output Delay per Channel, 31 Band GEQ per Channel, PEQ per Channel, Load Impedance
Our Price
TBA
BUY NOW!
Availability of this item:
In Stock
In Stock
Продуктът е наличен в
• София, Централен склад бул. "Проф. Цветан Лазаров" 74А
Useful links:
Into Category:
Power Amps. 850-2000 Watt (4 ohm)
Power Amps. with DSP Controller
Installation Power Amplifiers
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 0.94 seconds