Search
Current Category
sE electronics
Components for Sennheiser Wireless Condenser Microphones DI-Boxes Dynamic Microphones Instrument Microphones Large-diaphragm Microphones Microphones for Amplifiers Microphones for Bass Drum Mics. for Acoustic Guitars Other Accessories Preamps Small-diaphragm Microphones USB & iPOD Microphones Windshields and Pop-Filters Wireless Mics. with Handheld Microphone Лентови микрофони
Components for Sennheiser Wireless Condenser Microphones DI-Boxes Dynamic Microphones Instrument Microphones Large-diaphragm Microphones Microphones for Amplifiers Microphones for Bass Drum Mics. for Acoustic Guitars Other Accessories Preamps Small-diaphragm Microphones USB & iPOD Microphones Windshields and Pop-Filters Wireless Mics. with Handheld Microphone Лентови микрофони
Category
Manifacturer
Home
» sE electronics
» DN 100
Klark Teknik DN 100
Features:
The new Klark Teknik DN100 Direct Injection Box is the natural successor to the long-established LBB100.
A ground-up redesign provides an extended dynamic range, lower noise floor and all the world-class audio performance you’d expect from Klark Teknik. DN100 is also designed to handle the rigours of life on the road: a thick aluminium shell protects the electronics, and this in turn is protected by a tough silicone rubber casing, which is replaceable and available as a spare part.
Input
Type active electronic, balanced or unbalanced
Impedance 1M Ohm nominal, balanced or unbalanced (jack connectors) 20K Ohm (XLR input only)
Connectors 2 quarter inch jacks and 3-pin XLR linked in parallel
Maxmum level 30dBu
Attenuator 30dB switchable
Output
Type Transformer Isolated, balanced
Impedance 300 Ohm
Connector 3 pin XLR
Max. Level 10dBu with load >2k Ohm
Min. load 600 Ohm
Performance
Noise -100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor
Frequency response +0.5/-1dB 20Hz to 20kHz
Distortion (THD+N) output <0.01% @ 1kHz, +4dBu
Power Requirement
Voltage +48V Phantom *
Current consumption <10mA
A ground-up redesign provides an extended dynamic range, lower noise floor and all the world-class audio performance you’d expect from Klark Teknik. DN100 is also designed to handle the rigours of life on the road: a thick aluminium shell protects the electronics, and this in turn is protected by a tough silicone rubber casing, which is replaceable and available as a spare part.
Input
Type active electronic, balanced or unbalanced
Impedance 1M Ohm nominal, balanced or unbalanced (jack connectors) 20K Ohm (XLR input only)
Connectors 2 quarter inch jacks and 3-pin XLR linked in parallel
Maxmum level 30dBu
Attenuator 30dB switchable
Output
Type Transformer Isolated, balanced
Impedance 300 Ohm
Connector 3 pin XLR
Max. Level 10dBu with load >2k Ohm
Min. load 600 Ohm
Performance
Noise -100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor
Frequency response +0.5/-1dB 20Hz to 20kHz
Distortion (THD+N) output <0.01% @ 1kHz, +4dBu
Power Requirement
Voltage +48V Phantom *
Current consumption <10mA
Our Price
237.05 BGN
BUY NOW!
Availability of this item:
on request
on request
Warranty: 12 months
Useful links:
Into Category:
Audiotools
DI-Boxes
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 0.92 seconds