Search
Current Category
RODE
+ Large-diaphragm Microphones
3,5mm Jack Acc. for Wireless Systems Adapter Plugs Bags for Studio Equipment Broadcast Microphones Camcorder mics Condenser Microphones DSLR Mics & Recorders Dynamic Microphones Field Recorders Goosenecks for Microphones Headset Microphones Holders for Microphones Instrument Microphones Lavalier Microphones Matched Pair Mic fishpole Microphone Cables Microphones for Amplifiers Microphones for Bass Drum Microphones for Special Instruments Microphones for String Instruments Microphones for Toms Microphones for Wind Instruments Mics. for Acoustic Guitars Mics. for Saxophone Mics. for Trumpet, Horn ETC Multi purpose dynamic microphones Other Accessories Overhead Microphones Overhead Microphones Plastic Cases Podcast Equipment Shockmounts for Microphones Small-diaphragm Microphones Special Adapters Specialty stands Standard Mixing Desks Stereo Microphones Table Mic Stands TV/Camcorder mic accessories USB & iPOD Microphones Windshields and Pop-Filters Wireless Devices for Cameras Wireless Mics. with Handheld Microphone
3,5mm Jack Acc. for Wireless Systems Adapter Plugs Bags for Studio Equipment Broadcast Microphones Camcorder mics Condenser Microphones DSLR Mics & Recorders Dynamic Microphones Field Recorders Goosenecks for Microphones Headset Microphones Holders for Microphones Instrument Microphones Lavalier Microphones Matched Pair Mic fishpole Microphone Cables Microphones for Amplifiers Microphones for Bass Drum Microphones for Special Instruments Microphones for String Instruments Microphones for Toms Microphones for Wind Instruments Mics. for Acoustic Guitars Mics. for Saxophone Mics. for Trumpet, Horn ETC Multi purpose dynamic microphones Other Accessories Overhead Microphones Overhead Microphones Plastic Cases Podcast Equipment Shockmounts for Microphones Small-diaphragm Microphones Special Adapters Specialty stands Standard Mixing Desks Stereo Microphones Table Mic Stands TV/Camcorder mic accessories USB & iPOD Microphones Windshields and Pop-Filters Wireless Devices for Cameras Wireless Mics. with Handheld Microphone
Category
Manifacturer
Home
» RODE
» Large-diaphragm Microphones
» NT2-A
RODE NT2-A
Features:
Multi-Pattern Dual 1-inch Condenser Microphone.
The NT2-A carries on the tradition forged by the now legendary RODE NT2. A professional large 1-inch capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
Features:
• Large 1" HF1 gold sputtered capsule
• On body control of polar pattern, HPF and PAD
• Three position variable polar pattern - Omni, Cardioid or Figure 8
• Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
• Three position PAD - 0dB, -5dB or -10dB
• Ultra low noise
• Internal capsule shock mounting
• Includes RODE SM6 shock mount, pop filter and dust cover
• Designed and manufactured in Australia
Technical Features:
• Acoustic Principle: Pressure Gradient
• Active Electronics: JFET impedance converter with bipolar output buffer
• Capsule: 1.00"
• Polar Pattern: Cardioid
• Address Type: Side
• Frequency Range: 20Hz - 20kHz
• Output Impedance: 200 Ohms
• Maximum SPL: 147dB SPL (at 1kHz, 1% THD into 1KOhm load)
• Maximum Output Level: 16.0mV
• Sensitivity: -36.0dB re 1 Volt/Pascal (16.00mV at 94 dB SPL) +/- 2 dB at 1kHz
• Equivalent Noise Level, (A-weighted): 7dB-A
• Power Options: +24V phantom power / +48V phantom power
• Weight: 860.00 gr
• Dimensions (H x W x D), mm: 209.00 x 55.00 x 55.00
• Output: XLR Output
The NT2-A carries on the tradition forged by the now legendary RODE NT2. A professional large 1-inch capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
Features:
• Large 1" HF1 gold sputtered capsule
• On body control of polar pattern, HPF and PAD
• Three position variable polar pattern - Omni, Cardioid or Figure 8
• Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
• Three position PAD - 0dB, -5dB or -10dB
• Ultra low noise
• Internal capsule shock mounting
• Includes RODE SM6 shock mount, pop filter and dust cover
• Designed and manufactured in Australia
Technical Features:
• Acoustic Principle: Pressure Gradient
• Active Electronics: JFET impedance converter with bipolar output buffer
• Capsule: 1.00"
• Polar Pattern: Cardioid
• Address Type: Side
• Frequency Range: 20Hz - 20kHz
• Output Impedance: 200 Ohms
• Maximum SPL: 147dB SPL (at 1kHz, 1% THD into 1KOhm load)
• Maximum Output Level: 16.0mV
• Sensitivity: -36.0dB re 1 Volt/Pascal (16.00mV at 94 dB SPL) +/- 2 dB at 1kHz
• Equivalent Noise Level, (A-weighted): 7dB-A
• Power Options: +24V phantom power / +48V phantom power
• Weight: 860.00 gr
• Dimensions (H x W x D), mm: 209.00 x 55.00 x 55.00
• Output: XLR Output
Our Price
748.69 BGN
BUY NOW!
Availability of this item:
on request
on request
Warranty: 12 months
Related products:
sE electronics
RF (RF PRO)
323.88 BGN
sE electronics
RF SPACE
478.79 BGN
sE electronics
RF X (Reflecion filter X)
185.41 BGN
Koenig & Meyer
210/2-55
110.74 BGN
Koenig & Meyer
210/6-55
92.33 BGN
Koenig & Meyer
210/9
112.38 BGN
Into Category:
Condenser Microphones
Large-diaphragm Microphones
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 0.94 seconds