Search
Current Category
Audio-Technica Hi-Fi & Phono
Audiophile MC Cartridges Beltdrive Turntables Cartridge headshells Cartridges Cartridges & Turntable Accessories Direct Drive Turntables Hi-Fi & Audiophile Phono Cartridges Hi-Fi Stylus Mono Records MC Cartridges Moving Magnet Cartridges P and U mount MM Cartridges Spare cartridge Styli Styluses Turntable accessories Turntables Turntables HiFi Vinyl care accessories
Audiophile MC Cartridges Beltdrive Turntables Cartridge headshells Cartridges Cartridges & Turntable Accessories Direct Drive Turntables Hi-Fi & Audiophile Phono Cartridges Hi-Fi Stylus Mono Records MC Cartridges Moving Magnet Cartridges P and U mount MM Cartridges Spare cartridge Styli Styluses Turntable accessories Turntables Turntables HiFi Vinyl care accessories
Category
Manifacturer
Home
» Audio-Technica Hi-Fi & Phono
» AT-OC9XSL
Audio-Technica Hi-Fi & Phono AT-OC9XSL
Features:
AT-OC9XSL Dual Moving Coil Cartridge
The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
Tech. Specs:
• Frequency Response: 20 - 50,000 Hz
• Channel Separation: 28 dB (1 kHz)
• Vertical Tracking Angle: 20 degrees
• Vertical Tracking Force: 1.8 to 2.2 g (standard 2.0 g)
• Stylus Construction: Nude rectangular shank
• Recommended Load Impedance: Min 100 Ohms
• Coil Impedance: 12 Ohms (1 kHz)
• DC Resistance: 12 Ohms
• Coil Inductance: 25 ?H (1 kHz)
• Output Voltage: 0.4 mV (@ 1 kHz, 5 cm/sec)
• Output Channel Balance: 0.5 dB (1 kHz)
• Stylus Shape: Special Line Contact
• Cantilever: 0.28 mm O nude boron
• Static Compliance: 22 x 10 – 6 cm / dyne
• Dynamic Compliance: 18 x 10 – 6 cm / dyne (100 Hz)
• Mounting: 1/2” centers / Threaded inserts
• Cartridge Weight: 7.6 g
• Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm
• Body Material: Aluminium
• Stylus Size: 1.5 x 0.28 mil
• Terminal Pins: Brass
• Wire Used for Coil: PCOCC (Copper by Ohno Continuous Casting process.)
Accessories Included:
• 1 non magnetic screw driver
• 1 brush
• 2 washers
• 4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector
The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
Tech. Specs:
• Frequency Response: 20 - 50,000 Hz
• Channel Separation: 28 dB (1 kHz)
• Vertical Tracking Angle: 20 degrees
• Vertical Tracking Force: 1.8 to 2.2 g (standard 2.0 g)
• Stylus Construction: Nude rectangular shank
• Recommended Load Impedance: Min 100 Ohms
• Coil Impedance: 12 Ohms (1 kHz)
• DC Resistance: 12 Ohms
• Coil Inductance: 25 ?H (1 kHz)
• Output Voltage: 0.4 mV (@ 1 kHz, 5 cm/sec)
• Output Channel Balance: 0.5 dB (1 kHz)
• Stylus Shape: Special Line Contact
• Cantilever: 0.28 mm O nude boron
• Static Compliance: 22 x 10 – 6 cm / dyne
• Dynamic Compliance: 18 x 10 – 6 cm / dyne (100 Hz)
• Mounting: 1/2” centers / Threaded inserts
• Cartridge Weight: 7.6 g
• Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm
• Body Material: Aluminium
• Stylus Size: 1.5 x 0.28 mil
• Terminal Pins: Brass
• Wire Used for Coil: PCOCC (Copper by Ohno Continuous Casting process.)
Accessories Included:
• 1 non magnetic screw driver
• 1 brush
• 2 washers
• 4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector
Our Price
BUY NOW!
Availability of this item:
In Stock
In Stock
Warranty: 24 months
Продуктът е наличен в
• София, Магазин YAMAHA бул. "Искърско шосе" 7
Useful links:
Into Category:
Hi-Fi & Audiophile Phono Cartridges
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 0.94 seconds