Features:
ATW-1101 System 10 Wireless bodypack /Transmitter
Affordable digital wireless unit
Includes an Audio-Technica ATW-T1001 pbodypack transmitter
Clear sound quality and rock-solid, dependable performance
Advanced 24-bit operation in the 2.4GHz range
Automatic frequency scanning finds an open channel at the touch of a button
True-diversity operation selects the better signal from the 2 receiver sections, reducing dropouts
Up to 8 units can be used together simultaneously
Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
Tech Specs
Overall System
Operating Frequencies 2.4 GHz ISM band
Frequency Response 20 Hz to 20 kHz Depending on microphone type
Operating Range 30 m (100') Open range env. with no interfering signals
Dynamic Range >109 dB (A-weighted), typical
Total Harmonic Distortion <0.05% typical
Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Audio Sampling 24 bit / 48 kHz
Latency 3.8 ms
Simultaneous Systems Per Band 8
System: Analog/Digital Digital
System: Frequency Range 2.4GHz
System: Operating Range 100 ft. Line-of-sight
System: Frequency Response 20Hz-20kHz
System: Microphone Included Yes
System: Channel Selection Auto
Belt Pack
RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Input Connections Four-pin Locking Connector,
Pin 1: GND,
Pin 2: INST INPUT,
Pin 3: MIC INPUT,
Pin 4: DC BIAS +9V
Battery Type Two 1.5V AA
Battery Life >7 hours (alkaline) Depending on batt. type & use pattern
Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight 100g
Receiver: Antenna Type Fixed
Receiver: Front Panel Display Yes
Receiver: Displays LED
Receiver: Outputs 1 x XLR, 1 x 1/4"