Features:
Set of 100 IWSUB8 - inwall subwoofer + IWSUB8 Amplifier amplifier specially tailored for this subwoofer
100 IWSUB8 - inwall dubwoofer
Key points:
• Bass cut-off frequency: 30Hz to -6db; • Low depth (86mm) fitting 16" OC studs in-wall installation.
• Nominal impedance of 8 Ohm, able to be connected by pairs with 100 IWSUB8 Amplifier.
Technical Specifications:
• Type: Passive subwoofer
• Drivers:8" (21cm) Polyglass Woofer
• Frequency response (+/- 3dB) 34Hz - 140Hz
• Cut-off frequency 30Hz
• Nominal impedance 8 Ohm
• Recommended amp power: Max 200W @ 4 Ohm
• Dimensions: 352 x 98 x 1,300mm
• Cut-out dimensions:352 x 1,300mm;
• Depth from wall: 86 mm
• Weight: 14.6kg;
Series 100 IWSUB8 AMPLIFIER
Key points:
• Peak power 200W, continuous power 150W under 4 Ohm.
• Amplifier able to drive 2 x 100 IWSUB8 subwoofers connected in parallel.
• High-level electronic protection.
Technical Specifications:
• Type: Subwoofer amplifier
• Power (continuous): Max 200W, 150W continuous (4?)
• Minimum load: 4?
• Power consumption: 150W
• Stand-by power consumption: 0.5W
• Bandwith: 20-250Hz
• Subsonic filter: 18dB/oct.
• Inputs: LFE, Line in L/R
• Outputs: Line out L/R and subwoofer power output on speaker terminal
• Cord: Detachable IEC power cord
• Protection: Dynamic power control, thermal protection, short circuit, fuse, and over-current protection