Search
Current Category
APART/BIAMP
+ Transformers for 100 V installations
Acc. for Mounting Ceiling Speakers - Standard Ceiling Speakers - Water proof Ceiling Speakers 2-Way (HiFi) Ceiling Subwoofers Column Speakers Conference Microphones Control Systems EN 54-24 Certified Loudspeakers Full-Range Passive Loudspeakers Gooseneck Microphones Home/HI-FI AM/FM Tuners Horn Speakers & Sound Projectors Installation & PA Players Installation Housings ETC Installation Mixer Amplifiers Installation Power Amplifiers Installation Pre-amplifiers In Wall Speakers Isolation Transformer Matrix Mixers Multi-Channel Power Amps. Other Installation Accessories Outdoor Wall Speakers Paging consoles & Microphones Passive Subwoofers Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Small Loudspeakers for Installations Speaker Stands Special Speakers Surround/Satelite Speakers Volume Controls & Program Selectors Wall Speakers
Acc. for Mounting Ceiling Speakers - Standard Ceiling Speakers - Water proof Ceiling Speakers 2-Way (HiFi) Ceiling Subwoofers Column Speakers Conference Microphones Control Systems EN 54-24 Certified Loudspeakers Full-Range Passive Loudspeakers Gooseneck Microphones Home/HI-FI AM/FM Tuners Horn Speakers & Sound Projectors Installation & PA Players Installation Housings ETC Installation Mixer Amplifiers Installation Power Amplifiers Installation Pre-amplifiers In Wall Speakers Isolation Transformer Matrix Mixers Multi-Channel Power Amps. Other Installation Accessories Outdoor Wall Speakers Paging consoles & Microphones Passive Subwoofers Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Small Loudspeakers for Installations Speaker Stands Special Speakers Surround/Satelite Speakers Volume Controls & Program Selectors Wall Speakers
Category
Manifacturer
Home
» APART/BIAMP
» Transformers for 100 V installations
» T20IP
APART/BIAMP T20IP
Features:
Transformer 100V to 8 Ohm 2.5/5/10/20W, IP55
The T20iP is a small built-in 100 Volt line transformer, designed to make it possible to convert a standard 8 ohms loudspeaker into a 100 Volt line speaker with selectable power taps (2.5 – 5 – 10 and 20 Watts in 100 Volt).
This transformer will open a lot of additional speaker models to the 100 Volt speaker range. The only thing that needs to be done is to connect the T20iP transformer between the 100 Volt amplifier and the low impedance loudspeaker.
Another great advantage of the T20iP is that it’s packed inside a humidity resistant box.
The Apart new waterproof marine speakers, the CMART Series, are already equipped with this 20 watts transformer (T20iP) what makes this waterproof series suited for low impedance as well as 100 volt systems.
Specifications:
Transformer type: 100 Volt to 8 Ohms
Power @ 100 Volt: 20 – 10 – 5 – 2.5 watts via power selector
Primary impedance (with 8 Ohms load): 500 – 1000 – 2000 – 4000 Ohms
Secondary impedance: 8 Ohms
Dimensions without cables (L x H x D): 112 x 53 x 58 mm (82 with mounting tabs)
Mounting: 4 mounting holes 4 mm diameter
Mounting hole spacing: approx 67 x 72 mm
IP rating: 55
Weight: 520 g
Cable length: +150 cm
The T20iP is a small built-in 100 Volt line transformer, designed to make it possible to convert a standard 8 ohms loudspeaker into a 100 Volt line speaker with selectable power taps (2.5 – 5 – 10 and 20 Watts in 100 Volt).
This transformer will open a lot of additional speaker models to the 100 Volt speaker range. The only thing that needs to be done is to connect the T20iP transformer between the 100 Volt amplifier and the low impedance loudspeaker.
Another great advantage of the T20iP is that it’s packed inside a humidity resistant box.
The Apart new waterproof marine speakers, the CMART Series, are already equipped with this 20 watts transformer (T20iP) what makes this waterproof series suited for low impedance as well as 100 volt systems.
Specifications:
Transformer type: 100 Volt to 8 Ohms
Power @ 100 Volt: 20 – 10 – 5 – 2.5 watts via power selector
Primary impedance (with 8 Ohms load): 500 – 1000 – 2000 – 4000 Ohms
Secondary impedance: 8 Ohms
Dimensions without cables (L x H x D): 112 x 53 x 58 mm (82 with mounting tabs)
Mounting: 4 mounting holes 4 mm diameter
Mounting hole spacing: approx 67 x 72 mm
IP rating: 55
Weight: 520 g
Cable length: +150 cm
Our Price
BUY NOW!
Availability of this item:
In Stock
In Stock
Warranty: 12 months
Продуктът е наличен в
• София, Централен склад бул. "Проф. Цветан Лазаров" 74А
Useful links:
Related products:
APART/BIAMP
CMAR5-W
153.60 BGN
APART/BIAMP
CMAR6-W
199.20 BGN
APART/BIAMP
CMAR8-W
270.00 BGN
Into Category:
Transformers for 100 V installations
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 0.92 seconds