Search
Current Category
CHAUVET DJ
Analogue Remote controll Automated Followspots Bags for lighting gear Barndoors Club / Disco Controllers Confetti Confetti Mashines DMX Controll DMX Controll DMX Controlled Lighting Effects DMX Splitters Haze Fluids ICE Mashines Image Projection LED Architectural Lighting LED Canvas / Module LED Moving Heads LED Movingheads LED PAR LED Pixel Bars LED Washer and Floods Lighting Cases Lighting Packages Mirror Ball Spots Moving Heads Scanners Smoke Fluids Sound-to-Light Controlled Lighting Effects UV Black Light Wash Moving Heads Wireless DMX
Analogue Remote controll Automated Followspots Bags for lighting gear Barndoors Club / Disco Controllers Confetti Confetti Mashines DMX Controll DMX Controll DMX Controlled Lighting Effects DMX Splitters Haze Fluids ICE Mashines Image Projection LED Architectural Lighting LED Canvas / Module LED Moving Heads LED Movingheads LED PAR LED Pixel Bars LED Washer and Floods Lighting Cases Lighting Packages Mirror Ball Spots Moving Heads Scanners Smoke Fluids Sound-to-Light Controlled Lighting Effects UV Black Light Wash Moving Heads Wireless DMX
Category
Manifacturer
Home
» CHAUVET DJ
» Controller RDM 5.5 Splitter
Martin Controller RDM 5.5 Splitter
Features:
The Martin RDM 5.5 Splitter is the perfect companion to any controller or DMX/RDM device. The main purpose of the Martin 5.5 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin RDM 5.5 Splitter will help to rectify the signal.
Through fully individual isolated input and 5 outputs, the Martin RDM 5.5 Splitter will protect your DMX controller and DMX fixture against voltage surge on the data line. Ground loops are common in complex lighting setups and such problems can create errors in the DMX data. The Martin 5.5 Splitter will help to prevent such situations.
Another common issue with DMX communication is reflection caused by long lines, too many connections, or too many devices on the same line, etc. The Martin RDM 5.5 Splitter will prevent such reflection by dividing the load over several outputs and therefore making shorter lines with less connections and devices.
Data monitoring
While the DMX signal runs through the Martin 5.5 Splitter, a microprocessor decodes and monitors the signal. If an error is detected on the DMX line, the splitter will illuminate an error LED.
RDM Data
RDM (Remote Device Management) is the newly adopted standard in DMX transmission. RDM is a protocol that allows bidirectional communication between RDM capable fixtures and controllers. Most DMX splitters will not allow such data traffic to be processed.
• DMX Splitter / Booster
• Opto-isolated DMX Output ports
• DMX loop through port with built-in termination
• 5-pin XLR Input and Outputs
• RDM E1.20 compliant
• Optimized for Martin fixture firmware upload
• Universal power supply
• PowerCon connectors in/out for easy daisy-chaining
• Rack, truss and wall mountable
Physical:
• Depth: 125 mm
• Width: 220 mm
• Height: 45 mm
• Weight: 0.9 kg
Through fully individual isolated input and 5 outputs, the Martin RDM 5.5 Splitter will protect your DMX controller and DMX fixture against voltage surge on the data line. Ground loops are common in complex lighting setups and such problems can create errors in the DMX data. The Martin 5.5 Splitter will help to prevent such situations.
Another common issue with DMX communication is reflection caused by long lines, too many connections, or too many devices on the same line, etc. The Martin RDM 5.5 Splitter will prevent such reflection by dividing the load over several outputs and therefore making shorter lines with less connections and devices.
Data monitoring
While the DMX signal runs through the Martin 5.5 Splitter, a microprocessor decodes and monitors the signal. If an error is detected on the DMX line, the splitter will illuminate an error LED.
RDM Data
RDM (Remote Device Management) is the newly adopted standard in DMX transmission. RDM is a protocol that allows bidirectional communication between RDM capable fixtures and controllers. Most DMX splitters will not allow such data traffic to be processed.
• DMX Splitter / Booster
• Opto-isolated DMX Output ports
• DMX loop through port with built-in termination
• 5-pin XLR Input and Outputs
• RDM E1.20 compliant
• Optimized for Martin fixture firmware upload
• Universal power supply
• PowerCon connectors in/out for easy daisy-chaining
• Rack, truss and wall mountable
Physical:
• Depth: 125 mm
• Width: 220 mm
• Height: 45 mm
• Weight: 0.9 kg
Our Price
BUY NOW!
Availability of this item:
on request
on request
Warranty: 12 months
Useful links:
Related products:
Martin
Controller DMX 5.3 Splitter
854.30 BGN
Related Category:
Lighting Controllers
Stage Lighting
Club / Disco Lighting
Cinema & TV Lighting
Theatre Lighting
Dimmers / Swich Packs
DMX Cables
3-Pin XLR
Into Category:
DMX Splitters
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 1.16 seconds