Features:
NO2-4FDW-1-A • Chassis Optical Connector • Black Chromium Plating • 4 Solder Contacts • 1 LC-Duplex Feedthrough Socket • 1 Shell Ground Contact (for SMPTE Cable Shield) • Waterproof According to IP65 • Front Panel Mount
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.
Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
Technical Specifications:
• Gender: Female
• Contact Resistance: < 7 mOhms
• Dielectric Strength: 1.5 kVdc
• Insulation Resistance: > 2 GOhms (Initial)
• Rated Current per Contact: 6 A
• Rated Voltage: < 50 V
• Ground Contact: Faston 2.8 x 0.5 (Soldering Possible)
• Insertion Force: < 45 N
• Withdrawal Force: < 45 N
• Lifetime: > 5000 Mating Cycles
• Locking Force: 1000 N
• Locking Device: Push-Pull
• Mounting Direction: Front Mounting
• Chassis Shape: D
• Contacts: Bronze (CuSn6)
• Insert: Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR)
• Shell: Zinc Diecast (ZnAl4Cu1)
• Shell Plating: Black Chromium
• Split Sleeve: Ceramics
• Temperature Range: -40 to +75
• Insertion Loss: < 0.4 dB / Connection
• Optical Connector: LC-Duplex Feedthrough