Features:
PLENA Fireman's Panel
The fireman’s panel is a remote control that has specialized buttons and indicators for firemen. The remote control has no zone selection, as the standard RC has, but large backlit buttons. It is possible to enter or acknowledge the emergency state, and acknowledge and reset the fault state. Emergency or alert messages can be started, and live calls can be made.
An LED meter shows the presence and level of the calls that are active in the system. The fault indicators show detailed information of a fault in the system. Connection to the Plena Voice Alarm System is via standard, shielded CAT?5 cable and RJ45 connectors. The included rack mounting brackets can also be used to mount the units to a rear wall with spacing for cables, and even to a flat surface above or below theunit.
Features:
Remote control of the voice alarm system
EN 54-16 and EN 60849 compliant
Emergency (EMG) microphone
EMG state and fault indicators
Call monitoring loudspeaker
Specifications:
Electrical
Power supply
Voltage 24 VDC, +20% / -10%
Current typical 100 mA
Current max (indicator test) 250 mA
Priority relay contacts 30 V, 1 A
Emergency relay contacts 30 V, 1 A
* Technical performance data acc. to IEC 60268-3
Mechanical
Dimensions 134 x 430 x 90 mm, (19" wide, 3U high)
Weight Approx. 3 kg
Mounting 19” rack or wall
Color Charcoal
Environmental
Operating temperature -10C to +55 ?C
Storage temperature -40 ?C to +70 ?C
Relative humidity <95%