Search
Current Category
Martin
Automated Followspots Automated Projectors Beam Moving Heads Clamps Club / Disco Controllers Color Changers Color Strobes Colour Changers DMX Controlled Lighting Effects DMX Splitters DMX to Analogue Converters DMX to RS-485 Converters LED Bars LED Canvas / Module LED Movingheads LED Moving Heads LED PAR LED Pixel Bars Lens Options Lighting Cases Media Servers Mounting Accessories Mouving Mirror DMX Effects Moving Heads PC Controllers Playback Controllers Profile Moving Heads Rain Protection Accessories RGB Lasers RS-485 to DMX Converters Scanners Sound-to-Light Controlled Lighting Effects Spot Moving Heads Strobes Strobes with DMX Controll Swich Packs Upgrade Kits Wash Moving Heads
Automated Followspots Automated Projectors Beam Moving Heads Clamps Club / Disco Controllers Color Changers Color Strobes Colour Changers DMX Controlled Lighting Effects DMX Splitters DMX to Analogue Converters DMX to RS-485 Converters LED Bars LED Canvas / Module LED Movingheads LED Moving Heads LED PAR LED Pixel Bars Lens Options Lighting Cases Media Servers Mounting Accessories Mouving Mirror DMX Effects Moving Heads PC Controllers Playback Controllers Profile Moving Heads Rain Protection Accessories RGB Lasers RS-485 to DMX Converters Scanners Sound-to-Light Controlled Lighting Effects Spot Moving Heads Strobes Strobes with DMX Controll Swich Packs Upgrade Kits Wash Moving Heads
Category
Manifacturer
Martin Controller RDM 5.5 Splitter
Features:
The Martin RDM 5.5 Splitter is the perfect companion to any controller or DMX/RDM device. The main purpose of the Martin 5.5 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin RDM 5.5 Splitter will help to rectify the signal.
Through fully individual isolated input and 5 outputs, the Martin RDM 5.5 Splitter will protect your DMX controller and DMX fixture against voltage surge on the data line. Ground loops are common in complex lighting setups and such problems can create errors in the DMX data. The Martin 5.5 Splitter will help to prevent such situations.
Another common issue with DMX communication is reflection caused by long lines, too many connections, or too many devices on the same line, etc. The Martin RDM 5.5 Splitter will prevent such reflection by dividing the load over several outputs and therefore making shorter lines with less connections and devices.
Data monitoring
While the DMX signal runs through the Martin 5.5 Splitter, a microprocessor decodes and monitors the signal. If an error is detected on the DMX line, the splitter will illuminate an error LED.
RDM Data
RDM (Remote Device Management) is the newly adopted standard in DMX transmission. RDM is a protocol that allows bidirectional communication between RDM capable fixtures and controllers. Most DMX splitters will not allow such data traffic to be processed.
• DMX Splitter / Booster
• Opto-isolated DMX Output ports
• DMX loop through port with built-in termination
• 5-pin XLR Input and Outputs
• RDM E1.20 compliant
• Optimized for Martin fixture firmware upload
• Universal power supply
• PowerCon connectors in/out for easy daisy-chaining
• Rack, truss and wall mountable
Physical:
• Depth: 125 mm
• Width: 220 mm
• Height: 45 mm
• Weight: 0.9 kg
Through fully individual isolated input and 5 outputs, the Martin RDM 5.5 Splitter will protect your DMX controller and DMX fixture against voltage surge on the data line. Ground loops are common in complex lighting setups and such problems can create errors in the DMX data. The Martin 5.5 Splitter will help to prevent such situations.
Another common issue with DMX communication is reflection caused by long lines, too many connections, or too many devices on the same line, etc. The Martin RDM 5.5 Splitter will prevent such reflection by dividing the load over several outputs and therefore making shorter lines with less connections and devices.
Data monitoring
While the DMX signal runs through the Martin 5.5 Splitter, a microprocessor decodes and monitors the signal. If an error is detected on the DMX line, the splitter will illuminate an error LED.
RDM Data
RDM (Remote Device Management) is the newly adopted standard in DMX transmission. RDM is a protocol that allows bidirectional communication between RDM capable fixtures and controllers. Most DMX splitters will not allow such data traffic to be processed.
• DMX Splitter / Booster
• Opto-isolated DMX Output ports
• DMX loop through port with built-in termination
• 5-pin XLR Input and Outputs
• RDM E1.20 compliant
• Optimized for Martin fixture firmware upload
• Universal power supply
• PowerCon connectors in/out for easy daisy-chaining
• Rack, truss and wall mountable
Physical:
• Depth: 125 mm
• Width: 220 mm
• Height: 45 mm
• Weight: 0.9 kg
Our Price
BUY NOW!
Availability of this item:
on request
on request
Warranty: 12 months
Useful links:
Related products:
Martin
Controller DMX 5.3 Splitter
854.30 BGN
Related Category:
Lighting Controllers
Stage Lighting
Club / Disco Lighting
Cinema & TV Lighting
Theatre Lighting
Dimmers / Swich Packs
DMX Cables
3-Pin XLR
Into Category:
DMX Splitters
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 1.04 seconds