Search
Current Category
NEUMANN
Active Nearfield Monitors Broadcast Microphones Camcorder mics Components for Sennheiser Wireless Condenser Microphones Digital microphones HiFi Headphones Holders for Microphones Instrument Microphones Large-diaphragm Microphones Mainmonitors Microphones for Special Instruments Microphones for String Instruments Microphones for Wind Instruments Mics. for Acoustic Guitars Mics. for Clarinets Mics. for Saxophone Mics. for Trumpet, Horn ETC Overhead Microphones Shockmounts for Microphones Small-diaphragm Microphones Studio Headphones USB Audio Interfaces Wireless Mics. with Headset Microphone
Active Nearfield Monitors Broadcast Microphones Camcorder mics Components for Sennheiser Wireless Condenser Microphones Digital microphones HiFi Headphones Holders for Microphones Instrument Microphones Large-diaphragm Microphones Mainmonitors Microphones for Special Instruments Microphones for String Instruments Microphones for Wind Instruments Mics. for Acoustic Guitars Mics. for Clarinets Mics. for Saxophone Mics. for Trumpet, Horn ETC Overhead Microphones Shockmounts for Microphones Small-diaphragm Microphones Studio Headphones USB Audio Interfaces Wireless Mics. with Headset Microphone
Category
Manifacturer
NEUMANN TLM 103 D mt
Features:
Condenser Microphone with integrated AD converter
Specifications TLM 103 D
Acoustic transducer: Pressure gradient transducer
Directional characteristic: Cardioid
Frequency response: 20 Hz to 20 kHz
Free-field sensitivity1):–39 dBFS
Equivalent noise level, CCIR3): 17.5 dB
Equivalent noise level, A-weighted3): 7 dB-A
Signal-to-noise ratio2), CCIR3): 76.5 dB
Signal-to-noise ratio2), A-weighted3): 87 dB
Maximum SPL at 0 dBFS: 134 dBSPL
Dynamic range, A-weighted3): 127 dB
Preset:
- Sampling rate: 48 kHz
- Gain: 10 dB (variable with DMI-2)
- Compressor on, Attack time 100 ms, Release time 0.5 s,
Threshold –10 dBFS, Ratio 2:1
Supply voltage range: +6 V to +10.5 VCurrent consumption: max. 150 mA
Weight: approx. 460 g, Diameter: 60 mm, Length: 132 mm
General Specifications of the Solution-D microphones
Interface: AES42
Remote controlled functions:
- Polar pattern4)
- Low-cut: flat, 40, 80, 160 Hz
- Pre-attenuation: 0 , -6, -12, -18 dB
- Gain: 0...63 dB in 1 dB steps, clickless
- Testsignal: 1 kHz, pink noise, white noise
- Parametric compressor/limiter (incl. de-esser function)
- Independent peak limiter avoiding any clipping
- Switch functions: soft muting, phase reverse, signal lights
- Signal lights: red4) and blue LEDs
- System functions, firmware download
A/D conversion: Neumann process (patented),
28-bit internal word length
Digital signal processing: Fixed-point,
variable internal word length 28 bits to 60 bits
Synchronization:
- Asynchronous operation (free-running, AES42 - Mode 1),
basic frequency accuracy: ± 25 ppm
- Synchronous operation (AES42 - Mode 2),
pulling range: Min. ± 100 ppm
Power supply (phantom power complying with AES42)
Output: XLR3M, 24 bits as per AES/EBU (AES3)
________________________
All data with respekt to 0 dB pre-attenuation and 0 dB gain.
1) at 1 kHz
2) re 94 dBSPL
3) according to IEC 60268-1;
CCIR-weighting according to CCIR 468-3, quasi peak;
A-weighting according to IEC 61672-1, RMS
4) D-01 only
Specifications TLM 103 D
Acoustic transducer: Pressure gradient transducer
Directional characteristic: Cardioid
Frequency response: 20 Hz to 20 kHz
Free-field sensitivity1):–39 dBFS
Equivalent noise level, CCIR3): 17.5 dB
Equivalent noise level, A-weighted3): 7 dB-A
Signal-to-noise ratio2), CCIR3): 76.5 dB
Signal-to-noise ratio2), A-weighted3): 87 dB
Maximum SPL at 0 dBFS: 134 dBSPL
Dynamic range, A-weighted3): 127 dB
Preset:
- Sampling rate: 48 kHz
- Gain: 10 dB (variable with DMI-2)
- Compressor on, Attack time 100 ms, Release time 0.5 s,
Threshold –10 dBFS, Ratio 2:1
Supply voltage range: +6 V to +10.5 VCurrent consumption: max. 150 mA
Weight: approx. 460 g, Diameter: 60 mm, Length: 132 mm
General Specifications of the Solution-D microphones
Interface: AES42
Remote controlled functions:
- Polar pattern4)
- Low-cut: flat, 40, 80, 160 Hz
- Pre-attenuation: 0 , -6, -12, -18 dB
- Gain: 0...63 dB in 1 dB steps, clickless
- Testsignal: 1 kHz, pink noise, white noise
- Parametric compressor/limiter (incl. de-esser function)
- Independent peak limiter avoiding any clipping
- Switch functions: soft muting, phase reverse, signal lights
- Signal lights: red4) and blue LEDs
- System functions, firmware download
A/D conversion: Neumann process (patented),
28-bit internal word length
Digital signal processing: Fixed-point,
variable internal word length 28 bits to 60 bits
Synchronization:
- Asynchronous operation (free-running, AES42 - Mode 1),
basic frequency accuracy: ± 25 ppm
- Synchronous operation (AES42 - Mode 2),
pulling range: Min. ± 100 ppm
Power supply (phantom power complying with AES42)
Output: XLR3M, 24 bits as per AES/EBU (AES3)
________________________
All data with respekt to 0 dB pre-attenuation and 0 dB gain.
1) at 1 kHz
2) re 94 dBSPL
3) according to IEC 60268-1;
CCIR-weighting according to CCIR 468-3, quasi peak;
A-weighting according to IEC 61672-1, RMS
4) D-01 only
Our Price
BUY NOW!
Availability of this item:
on request
on request
Warranty: 12 months
Useful links:
Into Category:
Digital microphones
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 1.05 seconds