Features:
Power Amplifier 120W 100V
The P-1812 PA Amplifier delivers 120 W power output. It is so designed that its power ON/OFF can be remotely controlled when used in conjunction with A-1800 series PA Amplifiers (optional). The P-1812 can also be used as a stand-alone amplifier.
Features:
• Power output of 120 W.
• Emergency control:
On the back panel of amplifier is a remote-in terminal for emergency control
which sets the default output level for the emergency input
• Input:
LINE: 0dB*1/–10dB*1 (switchable) 10kOhm, transformer balanced & RCA pin jack
• Line Output:
0dB*1, 600Ohm, unbalanced, RCA pin jack;
• Speaker Outputs:
High impedance (100V line/83Ohm), M4 screw terminal
Low impedance (4 – 16Ohm), M4 screw terminal
(Both Low and High impedance terminals
cannot be used at the same time.)
Specifications:
Rated Output: 120W 100V
Power Supply: 220 – 230 V AC or 240 V AC, 50/60 Hz; 24 V DC
Power/Current Consumption:
AC operation: 258W (rated output), 94W (EN60065)
24V DC operation: 7.0A (rated output), 2.7A (EN60065)
Frequency Response: 50 – 20,000 Hz (±3 dB)
S/N Ratio, (Band Pass: 20 – 20,000Hz):
Over 100dB (Master volume: min)
Over 97dB (Master volume: max, INPUT LEVEL switch: 0dB)
Over 90dB (Master volume: max, INPUT LEVEL switch: –10dB)
Control Input:
POWER REMOTE: No-voltage make contact input, open voltage: 24V DC,
short-circuit: under 1mA, M3 screw terminal
EMERGENCY: No-voltage make contact input, open voltage: 24V DC,
short-circuit: under 1mA, M3 screw terminal
Dimensions (WxHxD): 420 x 107.7 x 367 mm
Weight: 12.2 kg