Features:
Remote panel with audio input for PM1122
The PM1122RL is a remote control panel with local audio input (mini-jack and XLR) for the PM1122, APart's multifunctional pre-amplifier.
The control panel offers music level control, line source selection and microphone mix level control. The PM1122RL also adds a double local source input, which means that there can be a microphone on the XLR and/or an MP3 player, or a pc or other line input on the stereo mini-jack connector. However, the local source input is always mono. There can be phantom power to the XLR connector by setting a jumper on the pack of the control panel.
The remote panels are connected to the PM1122 by a standard CAT-5 cable wired according to the T-568B protocol. The maximum wire length is up to 300m, according to circumstances. You can use one PM1122RL per zone.
• Music and MicMix level control : 0-10V operated
• Music Selector control : DC operated
• Power supply : only via RJ-45 / CAT-5 to PM1122 main unit
• Input connector : stereo mini jack L & R mixed into mono
• Frequency response : 20Hz - 22 KHz
• Sensitivity - Impedance : 250mV/ -12dBv - 17 Kohm
• Max input level : -3dBV
• S/N ratio : > 80 dB
• THD : < 0,09%
• Tone control mic/line : from 100Hz/+3dB,10kHz/-6dB to 100Hz/-9dB,10KHz/+4dB
• Input mic connector : XLR-3 Electronically Balanced
• Frequency response : 100Hz - 20 KHz
• Sensitivity - Impedance : 3mV/ -50dBv - 1,2 Kohm
• S/N ratio : > 75 dB @ mic level 4mV
• THD : < 0,15%
• Phantom power : 20 V, load dependent
• Tone control mic/line : from 100Hz/+3dB,10kHz/-6dB to 100Hz/-9dB, 10KHz/+4dB