Текуща категория
APART/BIAMP
AM/FM/DAB Tuners Ceiling Subwoofers Control Systems EN 54-24 Високоговорители Full-Range пасивни колони Multi-Channel Power Amps. Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Surround/Satelite Speakers Аксесоари за монтаж Атенюатори и селектори на програми Аудио матрици Високоговорители за монтаж в стена Високоговорители за стена Влагозащитени високоговорители за вграждане Влагозащитени стенни високоговорители Двулентови високоговорители за вграждане Други акесоари за 100V инсталации Звукови колони Инсталационни колони Конферентни микрофони Корпуси за високоговорители Микрофони "гъша шия" Микрофонни пултове Пасивни субвуфери Плейъри за инсталация и PA Предусилватели Разделителни трансформатори Рупорни и прожекторни високоговорители Специални високоговорители Стандартни високоговорители за вграждане Стойки за озвучителни тела Трансформатори за 100V инсталации Усилватели на мощност Усилватели със смесител
Производител
ADJ
AKG
BMS
CES
CME
D&R
DNH
DW
EMG
ESP
GHS
GLP
IFF
iSK
JBL
Jem
KEF
KRK
LP
MXR
NUX
QSC
RCF
TOA
UB+
UDG
VDB
Начало » APART/BIAMP » REVAMP4120T
APART/BIAMP REVAMP4120T
Описание:
Power Amplifier 4x120W 35/50/75/100V, 2x240W bridge 4Ohm 70/100V, class D


REVAMP4120T is a professional 4-channel power amplifiers with 4x120 watt output power @ 100 volt or 4 ohms. The unit is also bridgeable to 2 x 240 watts @ 100 volt (or 8 ohms). The unit incorporates a high reliability European designed Hypex amplification and power supply technology, outputs with efficient Class D output topology and output transformers.
The very intuitive front display of the amplifier shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound.
This amplifier contains an intelligent variable speed cooling fan that only will be activated when needed in order to make sure the amplifier itself remains silent as much as possible and avoids the need of regular maintenance.
In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter.

Specifications:
• Power amp topology: Class-D
• Output channels: 4
• Output power RMS 4 ohms: 4x120 watts, bridged 8 ohms: 2x240 watts
• Sine wave capability: 500ms at full RMS output power
• Minimum load impedance: 4 ohms, bridged: 8 ohms
• Output power RMS 100 volts: 4 x 120 watts
• Output power RMS 100 volts bridged: 2 x 240 watts
• Line input(s) balanced: 4 Euroblock
• Line input(s) unbalanced: 4 RCA + 4 pass through RCA
• Input sensitivity: 0 dBV / 1 Vrms
• Output connections: Euroblock
• S/N ratio: > 101 dB @ Full power, A-weighted
• Frequency Response: 50 Hz - 20kHz
• Channel separation: > 68 dB @ Full power, 1kHz
• Cooling system: Convectional and temperature controlled fan
• Dimensions: 483 x 88 x 332 mm (including rack ears) 2HU
• Weight: 12.1 kg
Цена
Купи
Наличност:
По заявка

Гаранция: 12 месеца

бр.

Полезна информация:
В категории:
Power Amps. Up To 300 W (4 ohm)
Power Amps. Up To 800 W (4 ohm)
Multi-Channel Power Amps.
Installation Power Amplifiers