Описание:
2-Way Active Wide Coverage Loudspeaker
Technical Specifications:
• Operating Frequency Range: 55 Hz – 19.5 kHz
• Frequency Response: 56 Hz – 19 kHz ± 4 dB
• Phase Response: 90 Hz – 19.5 kHz ±45°
• Linear Peak SPL: 132.5 dB with 18 dB Crest Factor (M-noise) / 130 dB (Pink Noise) / 131 dB (B-noise)
• Coverage: Rotatable Horn 110° x 50°
• Low Frequency: Two 8-Inch Cone Drivers. 4 Ohms Nominal Impedance
• High Frequency: One 3-Inch Diaphragm Compression Driver Connected to a Rotatable Horn. 8 Ohms Nominal Impedance
• Audio Input Type: Differential, Electronically Balanced
• Maximum Common Mode Range: ±15 V DC, Clamped to Earth for Voltage Transient Protection
Connectors
• XLR 3-Pin Female Input with Male Loop Output. Optional XLR 5-Pin Connector to Accommodate Both
Balanced Audio and RMS Signals
• Input Impedance: 10 kOhms Differential Between Pins 2 and 3
• Wiring: Pin 1: Chassis/Earth Through 1 kOhm, 1000 pF, 15 V Clamp Network to Provide Virtual Ground Lift at Audio Frequencies / Pin 2: Signal + / Pin 3: Signal – / Pin 4: RMS (Polarity Insensitive) / Pin 5: RMS (Polarity Insensitive) / Case: Earth Ground and Chassis
• Nominal Input Sensitivity: 0 dBV (1.0 V rms) Continuous is Typically the Onset of Limiting for Noise and Music
• Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ohms to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
• Amplifier Type: 3-Channel, Class-D
• Total Output Power: 1950 W peak
• THD, IM, TIM: <0.02%
• Cooling: Convection