Features:
Camera Slot UHF Receiver (Block 23)
588.800 - 607.900/614.100 - 614.300 MHz
Dual Receiver Design
Dual Channel SmartDiversity Reception
Single Channel Ratio Diversity Reception
LCD with RF Spectrum Scanner
SmartSquelch for Noiseless Muting
Automatic Power State Restoration
DSP-Based Pilot Tone Squelch
Rear Panel & Front Panel Audio Outputs
Supports Transmitter Talkback Feature
Operating Frequencies 588.800 - 607.900 MHz and 614.100 - 614.300 MHz
Frequency Adjustment Range 25.5 MHz (in 100 kHz steps)
Channel Separation 100 kHz
Receiver Type Dual conversion (superheterodyne)
IF Frequency Channel 1: 248.450 MHz and 350.000 kHz
Channel 2: 243.950 MHz and 250.000 kHz
Frequency Stability ±0.001%
Bandwidth 26 MHz at -3 dB (front end bandwidth)
Sensitivity 20 dB SINAD: 1.0 uV (-107 dBm) A weighted
60 dB Quieting: 2.2 uV (-100 dBm) A weighted
Squelch Quieting >100 dB (typical)
AM Rejection >60 dB (4 uV to 1 V)
Modulation Acceptance 85 kHz
Image & Spurious Rejection 85 dB
Third Order Intercept 0 dBm
Diversity Method SmartDiversity phased antenna combining or Ratio Diversity using both receivers for a single audio channel
FM Detector Digital Pulse Counting Detector operating at 250 and 350 kHz
RF Spectrum Analyzer Coarse and fine scanning modes for RF spectrum site survey
Antenna Inputs 50 ohms (SMA female connectors)
Audio Outputs Interchangeable D connector adapters for camera slot interfaces
Dual TA3 male (mini XLR) balanced output adapter
Balanced output adapter with fixed cables
Front Panel Audio Output Front panel TA5M with two balanced outputs
Audio Output Level Adjustable -50 to +5 dBu in 1 dB steps (unbalanced output is 6 dB lower)
Audio Channel Crosstalk -80 dB or better
Front Panel Controls and Indicators Sealed panel with membrane switches
LCD monitors pilot tone
Battery Type 9V alkaline
9V lithium
AA alkaline
AA lithium
NiMH
External DC input DC 6 - 18V (1.4W)